Lanberg Network Switch 24-ports (DEMO)

Product description

from Lanberg

SIMPLE AND FUNCTIONAL POE+ SWITCH FROM LANBERG
The PoE+ switch is an essential active networking device in any Ethernet infrastructure using power transmission through the structural cabling. RSGE-24P-2S-360 is dedicated to all kinds of installations: home, business, low-voltage, surveillance, IP, VoIP, cable TV networks, and in a particular product can be used in alarm, fire, or access control system.

Apart from the switch's primary function, i.e., supporting Ethernet frame transfer between ports, the device also provides a power supply for each appliance in PoE/PoE+ standard – 802.3af and at. This means that the switch can supply the devices with a total of up to 360 W. All of this is combined with data transmission at the same time.

As a result, such a solution saves resources, space, and time to install a separate electrical and network infrastructure. This is especially important if the network is dispersed and its end-devices do not have direct access to the power source, in particular, when they are mounted outside.

A RELIABLE SOLUTION WITHOUT COMPROMISES - WITH REAL POE BUDGET OF 360 W
The switch is fitted with a total of 26 RJ-45 ports, including 24 PoE+ (Fast Ethernet) and 2 Uplink (SFP Gigabit) ports. The well-thought-out design and attention to details and quality of components enable the user to achieve up to 360 W of real power for the end-devices, which translates into the simultaneous connection of:

24 IEEE 802.3af devices (max. 15W per port) or, 12 IEEE 802.3at devices (max. 30W per port),

The 2 remaining (Uplink) ports are dedicated to transferring data traffic between 24 PoE+ ports and external devices. In the case of surveillance/control systems, this is particularly useful as it allows the user to simultaneously play the recording(s) from the IP cameras on the NVR and share it further, e.g., in the local network or on the Internet.

INTELLIGENT POE PORT DISCONNECT FEATURE
It is not always clear how switches will behave when the available PoE budget is exceeded. There are several possibilities: the one that exceeds the budget or a random port or the recently connected one will be disconnected. In the last case, what will be their order after a power outage and restoration when all cables are simultaneously connected to the switch?

Lanberg has introduced an innovative solution in the RS series switches that eliminates all doubts about the mechanics of RJ-45 ports.

When the PoE budget is exceeded (e.g., due to a device connected to port 1), the switch will start disconnecting the PoE ports from the highest numbered one until the sum of loads does not exceed the available budget while keeping the remaining ports intact. The port(s) that will be disconnected will remain in this state until the PoE load decreases.

This functionality is primarily dedicated to demanding applications that emphasize safety and continuity of operation, requiring some devices to work continuously regardless of the situation. In such cases, Lanberg switches will help the user to safeguard sensitive devices by connecting them to the port with the lowest number.

EXTEND MODE UP TO 250 METERS
By default, the standard switches ensure that the devices can operate at distances of up to 100 m on a single Ethernet cable. However, sometimes, it turns out that a unique solution beyond the standard is required when developing cabling and network structure due to the extensive core network and complex environment. In the case of surveillance systems, this is quite a common problem, resulting from the too-long distance between the distribution device and the end-device.

Lanberg switches have a feature that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on a single cable section. Just toggle the switch position to „PoE+ Extend 250 m” on the housing to ensure the long-distance operation for ports 1 ~ 24.

The solution has been introduced for surveillance, IP, and access control systems, especially if the power equipment is located outside without the possibility of installing additional network distribution points.

Article number:

Our article number: D19518
Manuf. article number: RSGE-24P-2S-360

Brand

Cable solutions for everyone with Lanberg - Development and flexibility defines Lanberg, which provides various solutions in networking and cabling. Their wide product range is constantly evolving and the brand is based on their products receiving continuous quality improvements. Their talent for tailoring products to market needs has contributed to continuous growth.

If you are looking for a cable or adapter, Lanberg with its broad product portfolio probably has what you are looking for. In addition, it offers solutions such as structured cabling, including LAN and patch cables, as well as tools for building LAN network infrastructures. You will also find tools and products that help facilitate cables correct.

Connection

LAN	24
WAN	2
Wireless	No

Performance

Power supply

360W

Properties

Standard	802.3af PoE, 802.3at PoE+, 802.3i, 802.3u 100Base-TX, 802.3x (Flow-Control), 802.3z 1000Base-LX/SX
Transmission speed	1000 Mbps
Colour	Black

Size & weight

Width	410 mm
Depth	240 mm
Height	90 mm
Weight	2.63 g

Warranty

Warranty

2 year warranty